Skip to main content
svenska

Favorites

Your favorites has been successfully sent! An error occured while sending your favorites
  1. Panels and mouldings for interior use 010
Bygg- och fasadskivor

Panels and mouldings for interior use 010

Nordic Swan Ecolabel panels and mouldings for interior use have a reduced environmental and climate impact throughout their lifecycle – and meet strict requirements for recycled materials, chemicals and quality, promoting circular economy.

The requirements include:

  • Use of a high proportion of renewable and/or recycled materials.
  • Use of wood that is legally harvested and traceable. Furthermore, at least 70% is sourced from certified forestry.
  • Environmental and health properties of chemicals used in manufacturing of the product and in any surface treatment. Among others, the use of antibacterial substances and flame retardants are prohibited.
  • Limits for emissions of formaldehyde and organic solvents.
  • Limits for energy consumption in the production of the product.
  • Compliance with harmonised standards in accordance with the Construction Product Regulation (EU/305/2011) or voluntary CE marking according to ETA.

The product group includes interior panels and mouldings, which are typically used in walls, subfloors, ceilings, as well as being used in interior design and the production of furniture. Examples of panels:  wood-based panels, high pressure laminate (HPL), compact laminate, cross laminated timber (CLT), glued laminated timber (glulam), composite construction panels, gypsum plasterboard, cement-based panels as well as acoustic ceiling- and wall panels.

  • Welcome to apply for a Nordic Swan Ecolabel licence!

    This is how you do:

    1. Read the application guide.
    2. Log in to the Nordic Ecolabelling Portal.
    3. Start your application.

     

    If this is the first time you are applying, the authorized signatory must fill in your company information and approve the application conditions. In this way, you get login to the portal and the right to assign access to other colleagues.

     

    Request login

    To the Nordic Ecolabelling Portal

    Some special cases can not be done in the Nordic Ecolabelling Portal. Contact your advisor for such cases. More information can be found on "Application step by step".

  • Valid from 1 January 2025 Amount excluding VAT

    Application fee

    Application for a new licence 3 348 EUR
    Application for a renewed licence when the requirements have been tightened 1 673 EUR

    Annual licence fee

    The licence fee for the Nordic Swan Ecolabelled products is based on their turnover in the Nordic countries The fee is 0.15 % of the products' turnover in the Nordic countries up to 20.6 million EUR.
    The fee is 0.05 % of the products' turnover in the Nordic countries for the amount exceeding 20.6 million EUR.
    Minimum fee in the Nordic countries 2 232 EUR per year.
    Maximum fee in the Nordic countries 103 000 EUR per year.
    Fixed fee that is added for sales outside the Nordic countries 2 232 EUR per year if the turnover exceeds 309 000 EUR.

    Fee for extension / change of licence

    Fixed fee that is charged depending on how long the work takes.

    Up to 4 hours 418 EUR
    4–8 hours 836 EUR
    8 or more hours 1 673 EUR

    Fee for on-site inspections

    One on-site inspection in the Nordic countries is included when applying for a new or renewed licence.

    Additional on-site inspection within the Nordic countries 557 EUR per visit.
    On-site inspection outside the Nordic region, but within Europe 1 673 EUR per visit.
    On-site inspection outside Europe 2 790 EUR per visit.
    Additional fee for on-site inspections lasting longer than one day 1 115 EUR per day.

    Ecolabelling Sweden AB has no financial profit purpose and is financed through the fees above along with an annual government grant. The company is however liable for VAT according to article 56 of the European Council Directive 2006/112/EC.

    Invoicing is made in SEK with the exchange rate from the first banking day of the year.

    When both the applicant and the manufacturer are micro-enterprises, the application fee is reduced by 50%. A micro-enterprise is in this context defined as an enterprise with less than 10 employees and an annual turnover (of both ecolabelled and not ecolabelled products) below 2 million EUR.

     

    Valid from 1 January 2024 Amount excluding VAT

    Application fee

    Application for a new licence 3 251 EUR
    Application for a renewed licence when the requirements have been tightened 1 625 EUR

    Annual licence fee

    The licence fee for the Nordic Swan Ecolabelled products is based on their turnover in the Nordic countries The fee is 0,15 % of the products' turnover in the Nordic countries up to 20 million EUR.
    The fee is 0,05 % of the products' turnover in the Nordic countries for the amount exceeding 20 million EUR.
    Minimum fee in the Nordic countries 2 167 EUR per year.
    Maximum fee in the Nordic countries 100 000 EUR per year.
    Fixed fee that is added for sales outside the Nordic countries 2 167 EUR per year if the turnover exceeds 300 000 EUR.

    Fee for extension / change of licence

    Fixed fee that is charged depending on how long the work takes.

    Up to 4 hours 406 EUR
    4–8 hours 812 EUR
    8 or more hours 1 625 EUR

    Fee for on-site inspections

    One on-site inspection in the Nordic countries is included when applying for a new or renewed licence.

    Additional on-site inspection within the Nordic countries 541 EUR per visit.
    On-site inspection outside the Nordic region, but within Europe 1 625 EUR per visit.
    On-site inspection outside Europe 2 709 EUR per visit.
    Additional fee for on-site inspections lasting longer than one day 1 083 EUR per day.

    Ecolabelling Sweden AB has no financial profit purpose and is financed through the fees above along with an annual government grant. The company is however liable for VAT according to article 56 of the European Council Directive 2006/112/EC.

    Invoicing is made in SEK with the exchange rate from the first banking day of the year.

    When both the applicant and the manufacturer are micro-enterprises, the application fee is reduced by 50%. A micro-enterprise is in this context defined as an enterprise with less than 10 employees and an annual turnover (of both ecolabelled and not ecolabelled products) below 2 million EUR.

    • For new applications granted after 1 July, a fee reduction will apply for the first year. The minimum or maximum fee and any breakpoint will be multiplied by the result of the following formula: “number of remaining days in the year” x 2 / 365.
      Breakpoint = Turnover where the percentage changes in the calculation of licence fee.
      Minimum fee = the lowest licence fee Nordic ecolabelling annually invoices a company or a Group per product/ commodity group/ certifying country.

      Should a former holder of a license/registration continue to make use of the Nordic Ecolabel without being granted a new license/registration, the Nordic Ecolabelling organization reserves the right to claim financial compensation. The size of such compensation shall be equivalent to the turnover-based license fee that a licensee would have been required to pay for a license, and a financial penalty, the severity of which is determined by the extent and duration of the infringement as well as the damages that Nordic Ecolabelling may have incurred as a result of such misuse. Such a financial penalty should not normally be less than EUR 4,000 (four thousand). The Nordic Ecolabelling organizations may also take legal action against the infringement of the Nordic Ecolabel or if rules in the prevailing version of the Logo Guideline for the Nordic Ecolabel are not fulfilled.

  • 7.0: New criteria generation

    Version 7 of the criteria for Panels and mouldings for interior use has been published. The criteria are valid until December 31st 2028.

    6.12 ⇛ 6.13: Adjustment of requirement and prolongation of the validity of the criteria

    On February 13, 2024, Nordic Ecolabelling decided to prolong the criteria till 31 March 2025. On June 11, 2024, Nordic Ecolabelling decided to make an adjustment of requirement O21 prohibited substances regarding exemption for non-aromatic chlorinated organic compounds used as hardeners in 2-component adhesives also an exemption applies to Trimethylolprepane triacrylate (TMPTA) (CAS 15625-89-5) in requirement O20.

    The new version is called 6.13.

    6.11 ⇛ 6.12: Adjustment of requirement and prolongation of the validity of the criteria

    On 22 August 2023, Nordic Ecolabelling decided to split the criteria into two separate criteria for panels for indoor and outdoor use respectively. The name of these criteria has been changed to 010 panels and mouldings for interior use. Panels and cladding for exterior use are now covered by new product group 114.

    The new version is called 6.12 and is valid until December 31, 2024.

    6.10 ⇛ 6.11: Adjustment of requirement and prolongation of the validity of the criteria

    An adjustment has been made in requirement O21 (ban on the use of substances on the EU's candidate list) where melamine CAS No. 108-78-1 now is exempted. Furthermore the validity of the critieria has been prolonged with 6 months. The new version is called 6.11 and is valid until December 31, 2024.

    6.9 ⇛ 6.10: Adjustment of criteria

    An adjustment has been made in requirement O19, where resins with melamine are exempted from the classification prohibitions H351 and H361. The new version is called 6.10 and is valid until June 30, 2024.

    6.8 ⇛ 6.9: Prolongation of validity of criteria

    The validity of the criteria has been prolonged with 12 months. The new version is called 6.9  and is valid until 30 June 2024.

    6.7 ⇛ 6.8: Adjustment of criteria

    It has been decided to include untreated solid wood and mouldings in similar materials that are included in the product group for indoor use. The new version 6.8 is valid until June 30, 2023.

    6.6 ⇛ 6.7: Adjustment of criteria

    Requirement O10 on prohibited wood species has been adjusted as have requirements O24 and O25 with regard to the exemption for UV-hardener acrylates. Furthermore, requirement O24 has been adjusted with regard to the exemption for phenol. The new version 6.7 is valid until June 30, 2023.

    6.5 ⇛ 6.6: Prolongation of validity of criteria

    The validity of the criteria have been prolonged with 15 months. The new version is called 6.6 is valid until 30 June 2023.

    6.4 ⇛ 6.5: Prolongation of validity of criteria

    The validity of the criteria have been prolonged with 24 months. At the same time requirement O42 Return system was removed. The new version is called 6.5 is valid until 31 March 2022.

    6.3 ⇛ 6.4: Adjustment of criteria

    An adjustment in O33 regarding TVOC and formaldehyde was made. The new version is called 6.4 is valid until March 31st 2020.

    6.2 ⇛ 6.3: Adjustment of criteria

    An alternative version to requirements O6 and O7 included in Appendix 10 was introduced. The new version is called 6.3 and is valid until March 31st 2020.

    6.1 ⇛ 6.2: Adjustment of criteria

    An adjustment in requirement O34 has been introduced. The new version 6.2 is valid until March 31st 2020.

    6.0 ⇛ 6.1: Adjustment of criteria

    An exemption for bronopol up to 0.05 per cent by weight in requirement O21 has been introduced. The new version 6.1 is valid until March 31st 2020.

    6.0: New criteria generation

    Version 6 of the criteria has been published. The criteria are valid until March 31st 2020.

Contact me for more information